 |
 |
 |
 |
 |
 |
 |
 |
| State-of-the-art robotics |
 |
| Industry standard systems and processes |
 |
| Complete, in-house manufacturing facilities |
|
|
Specifications
The ProSeries work platforms may be used in a freestanding configuration or in a “tied" mast configuration. The maximum free standing height is 35 ft. In the tied mast configuration, stiff arms are installed between the tower mast and the building structure every 20ft. In this configuration, the maximum tower height is 250 ft. nominal. The allowable uniform load for the Pro Series is 20,000 lbs. The ProSeries has many advantages, one of the greatest advantages is modular bridging. The ProSeries uses 8', 6' and 4' bridge lengths to be used in cantilever mode, bearing mode or as forward extensions. Cantilever bridges are mounted to the ProSeries unit, using the Pro Bar system for a width up to 64 ft. on a single unit. Use the preassembled bearing bridges laid out over the ends of two ProSeries units, either in a straight line or by forming an angle with the power units. The versatile 4 ft. bridge can be used in cantilever mode, bearing mode or as a forward extension. As a forward extension, it can attach on the end of the ProSeries unit or in the middle.
24 foot Power Unit
| Platform Dimension |
7' x 24' |
| Load Capacity |
20,000 lbs |
| Tower Height |
Up to 250' nominal |
| Free Standing |
35' |
| Travel Speed |
5' per minute |
| Engine Type |
13 HP Honda gas - electric start |
| Tower |
16" x 16" x 60" - 240 lbs |
|
